The South White Chapel Bridge is now OPEN—seven (7) days ahead of schedule!
On Wednesday, December 31, 2014, the South White Chapel Bridge was opened back up to traffic following a three week closure that began the implementation of mitigation efforts to address erosion concerns around the bridge’s columns and supports. Crews worked diligently to pour new concrete collars around the bridge columns, which will enhance the column support of the bridge and ensure the bridge’s structural integrity.
The City has appreciated your patience during this closure and we recognize the inconvenience it may have caused some motorists.
“Due to the nature of the work, closing the bridge was deemed necessary in order to maximize the success of the mitigation efforts being undertaken,” notes Director of Public Works Robert Price, “we felt it necessary to limit loads on the bridge for safety reasons as well as construction efficiency.”
Although the bridge is opened, work will continue for the next several months on and around the South White Chapel Bridge as crews continue to implement erosion control and scour mitigation efforts. Temporary lane closures and delays may be likely as the work continues so please check for any updates regarding temporary closures/delays via the City’s Facebook and Twitter pages.
For more information about this project, please visit click here. For questions, please contact Steve Anderson, P.E., CFM at 817-748-8101.
Beginning the week of December 8, 2014, the South White Chapel Bridge, which crosses Big Bear Creek, will be closed for up to thirty (30) days to remove sand and rocks from around the bridge supports (aka “scour”) and to address channel erosion around the base of the bridge. This process, called “scour mitigation,” helps ensure the long-term integrity of the bridge and to ensure the safety of all motorists who use the bridge.
The bridge will be closed completely for the 30 days and motorists should seek an alternate route. We appreciate your patience as this important work is being done.
For questions, please contact the Public Works Department at 817-748-8098.
UPDATE: 11/25/2014 – The White Chapel Bridge Repair will begin the week of December 8th, at which time the bridge will be closed for up to 30 days.
UPDATE: 11/20/2014 – The project start for the White Chapel Bridge Repair has been pushed back to mid-December.
The South White Chapel Bridge, which crosses Big Bear Creek, will soon be closed to remove sand and rocks from around the bridge supports (aka “scour”) and to address channel erosion around the base of the bridge. This process, called “scour mitigation,” helps ensure the long-term integrity of the bridge and to ensure the safety of all motorists who use the bridge. The South White Chapel Bridge will be closed for up to thirty (30) days while the work is being done and is expected to open back up in December, weather permitting.
In 2011, the City of Southlake was notified by the Texas Department of Transportation (TxDOT) of concerns regarding channel degradation at the South White Chapel Bridge. Following this routine inspection, TxDOT recommended mitigation measures that will stabilize the channel bottom and help prevent further erosion. The City contracted Halff Associates, Inc. to produce an engineering report with recommendations for this scour mitigation project and the construction contractor Green Scaping, LP will implement the recommendations, which include:
The South White Chapel Bridge is important not only to the City of Southlake but also to the City of Colleyville, who will be sharing in the engineering and construction costs of the project. Because of the shared importance of the bridge to both cities, it is expected that these repairs will impact traffic in the area near the construction zone. As a result of the temporary closure, we are asking motorists who use this bridge to seek alternate routes for the 30 days.
Many discussions were held with the City of Colleyville regarding ways to allow the bridge to remain open to traffic during construction. Yet the need to protect the workers and the need to limit vibration of passing vehicles during the concrete collar installation made the 30 day closure necessary. Additionally, closing the bridge completely will allow the work to be done much faster than if it remained opened, which in turn ensures the bridge re-opens to traffic in a timelier manner.
We appreciate your patience during this process and, once again, ask motorists to seek alternate routes.
For additional information about this project, please visit the project construction page here. If there are any questions, please direct them to the Public Works Department at 817-748-8098.